Xerox Synergix 8855 보충 설명서 - 페이지 15

{카테고리_이름} Xerox Synergix 8855에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Synergix 8855 28 페이지. Windows nt 4.0 postscript print driver user guide
Xerox Synergix 8855에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지), 운영자 매뉴얼 (11 페이지), 보충 설명서 (26 페이지), 소프트웨어 설명서 (30 페이지)

페이지 인쇄

I/O Download of Firmware

Upgrades

It is possible to upgrade the firmware version with new releases by sending a

file to the controller over the network, serial or parallel cable connection.

Customers can download new firmware releases from the internet or can

acquire the files on a CD-ROM. If obtaining the firmware from the internet,

go to www.xes.com and follow the instructions provided.

Use the Document Submission Tool (part of AccXES Client Tools) or Web

Printer Manager Tool to send the firmware upgrade file to the controller. Note

that the Web PMT includes a useful Upload File button on the "Upload File"

page to assist in sending the new firmware upgrade to the controller.

When the firmware upgrade is sent to the controller, the Ready LED

extinguishes and the Busy LED will illuminate. After the firmware upgrade is

complete, the controller will re-boot showing the re-boot pattern (all LEDs on

except for Ready).

Note: The controller must be connected to the printer and both devices

powered to successfully download firmware.

Note: Print out a full set of test prints BEFORE performing the upgrade as

settings may be returned to their Factory Defaults and you may lose your

custom settings for the Active Parameters set. For Active Parameters Set

information, see "Setting the Active Parameters Option" in this manual.

XES Synergix 8855 Controller Setup Manual for Firmware 7.0