Xerox Synergix 8855 보충 설명서 - 페이지 9
{카테고리_이름} Xerox Synergix 8855에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Synergix 8855 28 페이지. Windows nt 4.0 postscript print driver user guide
Xerox Synergix 8855에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지), 운영자 매뉴얼 (11 페이지), 보충 설명서 (26 페이지), 소프트웨어 설명서 (30 페이지)
페이지 인쇄
Purpose of This Manual
The purpose of this manual is to provide information to aid in connecting the
AccXES Controller to remote workstations to the 8855 System.
Refer to the Web Printer Manager Tool (PMT) User Guide for specific
instructions on configuring the controller using the Web PMT.
This manual includes the following sections:
•
Floor Space Requirements.
•
Power Requirements.
•
Power Connections. If you are not familiar with the controller power
switch, ports refer to the figures.
•
Controller Port Locations. Locate all the ports to be used. Refer to
instructions in this manual on preparing each port.
•
Controller Specifications.
•
I/O Download of Firmware Upgrades.
•
Enabling Ports and Port Specifications.
Viewing the Test Prints
When power is switched on, the controller sends a test print to the printer.
The purpose of test prints is to provide a record of current system settings for
use in daily operations, Network Communications setup, and restoration of
desired parameters in cases of unexpected change (such as through
accidental use of the Restore Factory Default utility). Test print sets should
be saved at the following times:
•
When the initial install is complete and default settings are defined.
•
Anytime default settings are changed.
XES Synergix 8855 Controller Setup Manual for Firmware 7.0
The reference sets of the test print pages should be stored with the machine
service log, behind the service door of the XES Synergix 8855 printer.
NOTE: The printer must have bond paper installed to enable the printing of
any test print. When bond paper is not present (vellum or film only installed
in the printer) the test print must be canceled.
1