Xerox Wide Format 6204 설치 매뉴얼 - 페이지 5

{카테고리_이름} Xerox Wide Format 6204에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Wide Format 6204 20 페이지. Xerox 6204: supplementary guide
Xerox Wide Format 6204에 대해서도 마찬가지입니다: 릴리스 정보 (7 페이지), 설정 매뉴얼 (20 페이지), 릴리스 노트 (23 페이지), 릴리스 노트 (8 페이지), 릴리스 노트 (8 페이지), 빠른 시작 매뉴얼 (14 페이지), 릴리스 노트 (9 페이지), 사용자 설명서 (36 페이지)

Drivers

You can find the driver installation files on the customer CD entitled "Accxes Print Drivers", or

they can be downloaded from the www.xerox.com website (Select Support & Drivers. In the Wide

Format section select your printer group. Select the Drivers & Downloads link. Select the link of

the driver that you wish to install.)

A Windows 2000 or 2003 server system can have all of the drivers installed locally on it which all

of the workstations would require. Each workstation can then install the appropriate driver from

the server to make remote drivers.

These instructions describe how to install the HP-GL/2 printer driver locally on a workstation or

server.

To install a printer driver on a workstation from a server, see the section in this document entitled

"Remote Drivers". The printer driver must be installed on the server locally first, according to the

following instructions.

Note: Prior to installing this driver, you must remove all previous versions by following the

removal instructions.

The FreeFlow Accxes HP-GL/2 printer driver is delivered as a self-extracting zip file. Executing

this program will extract the files to a default directory or to a directory of the user's choice (e.g.

c:\temp). Use Window's Add Printer Wizard to add the printer, as described below.

Note: You must have administrator rights to install the driver and ports

You can install the HP-GL/2 driver on a standard TCP/IP port from one of the following

settings. If you are going to use the Standard TCP/IP Port, install it first, using the

directions in the following Standard TCP/IP Port Installation section. Then follow the

directions to install the HP-GL/2 driver. The control for Bi-directional is located on the

Device Options tab of the Printer Properties.

1. Go to the Printers Folder.

For Windows 2000: Select Start > Settings > Printers

For Window 2003 or XP: Select Start > Control Panel > Printers and Faxes

2. Click on the File Menu.

3. Click on the Server Properties... menu item.

4. Select the Ports tab.

5. Click the Add Port... button.

6. Select Standard TCP/IP.

7. Click the New Port... button. Click Next.

Xerox FreeFlow Accxes Drivers & Client Software Installation Guide