Xerox WorkCentre 5765 시작하기 매뉴얼 - 페이지 28

{카테고리_이름} Xerox WorkCentre 5765에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WorkCentre 5765 32 페이지. Smart card
Xerox WorkCentre 5765에 대해서도 마찬가지입니다: 보충 설명서 (1 페이지), 정보 매뉴얼 (50 페이지), 평가자 매뉴얼 (24 페이지), 데이터시트 (18 페이지), 정보 시트 (8 페이지), 안전한 설치 및 운영 (11 페이지), 사용자 지침 (5 페이지), 사용자 설명서 (8 페이지), 사본을 만드는 방법 (10 페이지), 설치 매뉴얼 (43 페이지)

Xerox WorkCentre 5765 시작하기 매뉴얼

Maintenance and Consumables

Maintenance and Consumables
There are several consumables on the device that need replenishing or replacing, such as paper,
staples, and customer replaceable units. To place an order for Xerox consumables, please contact your
local Xerox Representative giving your company name, product number and the machine serial
number.
For information about locating the serial number, please refer to
Machine and Job
Status.
Customer Replaceable Units
There are 6 replaceable units on the device:
Toner Cartridge (R1)
Xerographic Module (R2)
Fuser Module (R3)
Waste Toner Bottle (R4)
Ozone Filter (R5)
Document Feeder Feed Roll (R6)
The device will display a message on the touch screen when any of the units need to be reordered. This
message is a warning that the unit is nearing the end of its life. Only replace the unit when a message
actually instructs you to do so.
To replace a Customer Replaceable Unit, follow the instructions on the touch screen or use the
instructions provided with the consumable.
Staple Cartridges and Hole Punch Waste
If your device is equipped with a finisher, or a convenience stapler, you will be required to replace the
staple cartridge or cartridges when the device displays a message instructing you to do so. If your
finisher has the optional hole punch unit, you will also be required to empty the hole punch waste
container when prompted by the device.
Cleaning Tasks
Performing regular cleaning activities ensures the device is kept free of dust and debris. The device
covers, control panel and touch screen should all be cleaned using a soft lint-free cloth, lightly
dampened with water. Xerox Cleaning Fluid or Anti-Static Cleaner can be used to clean the document
glass, but must be applied using a cloth and not poured directly on the document glass. Remove any
residue with a clean cloth or paper towel.
For further information on maintenance tasks, refer to
Troubleshooting.
34
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Getting Started
Machine Information
General Care
on page 288 of
on page 245 of
General Care and