Xerox WORKCENTRE 5790 시작하기 매뉴얼 - 페이지 5

{카테고리_이름} Xerox WORKCENTRE 5790에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WORKCENTRE 5790 32 페이지. Smart card
Xerox WORKCENTRE 5790에 대해서도 마찬가지입니다: 정보 매뉴얼 (50 페이지), 참조 매뉴얼 (7 페이지), 평가자 매뉴얼 (24 페이지), 데이터시트 (18 페이지), 정보 시트 (8 페이지), 안전한 설치 및 운영 (11 페이지), 사용자 설명서 (8 페이지), 사본을 만드는 방법 (10 페이지), 설치 매뉴얼 (43 페이지)

Xerox WORKCENTRE 5790 시작하기 매뉴얼

Device Overview

2
10
1
5
3
6
4
Control Panel: Touch Screen and Numeric
1
Keypad.
Document Feeder and Document Glass: Used
2
for scanning single or multiple documents. The
document glass can be used for scanning single,
bound, custom size or damaged documents.
Paper Trays 1 and 2: These trays are standard
3
on all models. Trays 1 and 2 are fully adjustable
and can be used for media sizes 5.5x8.5" to
11x17"(A5 to A3).
Paper Trays 3 and 4: These trays are high
4
capacity paper trays. Trays 3 and 4 are dedicated
trays used for 8.5x11" or A4 size media.
Bypass Tray: Used for non-standard printing
5
media.
Paper Tray 5: This is an optional high capacity
6
paper tray. It is a dedicated tray used for 8.5x11"
or A4 long edge feed size media. Optional kits
are available to accommodate 11x17", A3,
8.5x14", 8.5x11" or A4 Short Edge Feed (SEF)
media.
Tray 6 (Inserter): An optional paper tray for use
7
with the High Volume Finisher. It is used to insert
pre-printed sheets into copy sets. It is not part of
the printing process and cannot be used for
imaging.
7
8
9
8
9
10
11
12
13
14
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
11
12
High Volume Finisher: This optional finisher
collates, offsets, stacks and staples your output.
Booklet Maker, Tri-fold and Hole Punch kits can
be installed with this finisher.
Booklet Maker and Trifolder: These are optional
devices which can be installed with the High
Volume Finisher to staple and fold booklets or
leaflets.
Convenience Stapler: This optional device
provides manual stapling of up to 50 sheets. The
Convenience Shelf must also be fitted.
Offset Catch Tray: Delivers output collated or
uncollated. Each set or stack will be offset from
the previous to enable easy separation.
Basic Office Finisher: This optional device
stacks, collates, staples and offsets your output.
Office Finisher: This optional device stacks,
collates, staples and offsets your output. Hole
punch kits are also available for this finisher.
Document Glass Cover: This is a flat hinged
cover for the document glass. It is fitted instead
of the document feeder and is standard on some
configurations.
Device Overview
13
14
11
Getting Started