Xerox WorkCentre 7132 설정 매뉴얼 - 페이지 5
{카테고리_이름} Xerox WorkCentre 7132에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WorkCentre 7132 10 페이지. Print copy scan fax email
Xerox WorkCentre 7132에 대해서도 마찬가지입니다: 빠른 사용 설명서 (32 페이지), 보충 설명서 (3 페이지), 종이 매뉴얼 (2 페이지), 평가자 매뉴얼 (24 페이지), 서비스 매뉴얼 (27 페이지)
페이지 인쇄
Scan to Mailbox Setup (Optional)
This feature allows documents to be stored in a mailbox for future processing. Scan to
Mailbox can be setup at the machine control panel or at a network computer through the
CentreWare Internet Services webpage. Instructions for each method are shown.
See also:
System Administrator Guide: Contains detail concerning Network Scanning setup.
User Guide: Contains information on mailbox setup through the control panel, as well
as CentreWare Internet Services.
Prerequisites for Scan to Mailbox Setup
Confirm that:
1.
An existing operational network utilizing TCP/IP is available.
Procedure for Scan to Mailbox Setup through the Control Panel
1.
Power on the device.
2.
Press Login/Logout, then type the UserID 11111 and press Confirm.
3.
From the System Administrator menu, select System Settings.
4.
Select Setup Menu.
5.
Select Mailbox.
6.
Select a mailbox to configure and press Create/Delete.
7.
Select password options and type a password, if desired. If a password is entered for a
mailbox, no one else can access that mailbox before entering the password.
8.
Select Mailbox Name and press Change Settings.
9.
Type a name for the mailbox and press Save.
10.
Change other settings as desired. When finished, select Close several times then Exit.
Procedure for Scan to Mailbox Setup through CentreWare Internet Services
1.
From a workstation, open up a web browser (such as Internet Explorer), and then enter
the device's IP address in the format http://xxx.xxx.xxx.xxx (the xxx's represent the
device's IP address). If connected properly, you should see a CentreWare Internet
Services web page for your device.
2.
Create mailboxes:
a.
Click the Properties tab.
b.
Click the Mailboxes folder.
c.
Click the Edit button.
d.
Enter the appropriate information. If a password is entered for a mailbox, no one
else can access that mailbox before entering the password.
e.
Click on Apply New Settings.
Note
If prompted to enter a User Name and Password, the default settings are 11111
and x-admin respectively.
Copyright © 2006, Xerox Corporation. All rights reserved.
Scan to Mailbox Setup (Optional)
5