Xerox WORKCENTRE 7435 보충 설명서 - 페이지 43

{카테고리_이름} Xerox WORKCENTRE 7435에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WORKCENTRE 7435 49 페이지. Security function
Xerox WORKCENTRE 7435에 대해서도 마찬가지입니다: 참조 매뉴얼 (28 페이지), 브로셔 및 사양 (8 페이지), 사양 (15 페이지), 평가자 매뉴얼 (32 페이지), 사양 (14 페이지), 소프트웨어 업그레이드 (2 페이지), 빠른 시작 매뉴얼 (7 페이지)

페이지 인쇄
Xerox WORKCENTRE 7435 보충 설명서

Problem Solving

This chapter describes solutions to problems that you may come across while using the machine and CentreWare
Internet Services. The machine has certain built-in diagnostic capabilities to help identify problems and faults, and
displays error messages on the control panel and web browser, whenever problems or conflicts occur.

Fault Clearance Procedure

If a fault or problem occurs, there are several ways in which you can identify the type of fault. Once a fault or
problem is identified, establish the probable cause, and then apply the appropriate solution.
If a fault occurs, first refer to the screen messages and animated graphics and clear the fault in the order
•
specified.
Also refer to the fault codes displayed on the touch screen in the Machine Status mode. Refer to Fault Codes
•
table on below for an explanation of some of the fault codes and corresponding corrective actions.
Alternatively, contact a System Administrator for assistance.
•
In some cases, it may be necessary to switch the machine off and then on.
•
CAUTION: Failure to leave at least 20 seconds between a power off and a power on can result in damage to the
hard disk in the machine.
If the problem persists, or a message indicates that you should call for service.
•
NOTE: At the time of the power failure, because the machine is equipped with the hard disk drive, all the queued
jobs will be saved. The machine will resume processing queued jobs when the power to the machine is back on.
43