Xerox 2101 사용자 설명서 - 페이지 10

{카테고리_이름} Xerox 2101에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 2101 22 페이지. Digital copier/printer
Xerox 2101에 대해서도 마찬가지입니다: 고객 릴리스 노트 (14 페이지), 시작하기 매뉴얼 (12 페이지)

페이지 인쇄
Xerox 2101 사용자 설명서
1.2 Switching On/Off Power
1.2.3
Auto Start
While waiting for the machine to warm up after the power is switched on, you can press the Start
button to program copying. This feature is called Auto Start.
■
Enabling Auto Start
To use the Auto Start feature, load the document, specify the desired settings and then press the Start
button.
The message "Please wait ... The job will start automatically." will be displayed and copying will begin
automatically once the machine has entered the Ready to Copy mode.
● If you have set the machine ready tone in Tools Mode, you will hear the tone when the machine has warmed up and is ready to
accept copy jobs. You can then proceed to set an Auto Start job after the tone. To set the machine ready tone or change its tone
volume, refer to "8.3 Setting Tools Mode".
Auto Start screen: When an A4 document is placed on the document
glass and three sets are to be made with no change in size.
■
Canceling Auto Start
To cancel an Auto Start job, select Stop on the screen or press the Stop button on the control panel
before the document is scanned.
Then press the C button and the Auto Start job will be canceled.
10