Xerox 4150X - WorkCentre B/W Laser 빠른 참조

{카테고리_이름} Xerox 4150X - WorkCentre B/W Laser에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 4150X - WorkCentre B/W Laser 1 페이지. Finisher installation guide
Xerox 4150X - WorkCentre B/W Laser에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 시작하기 매뉴얼 (38 페이지), 카트리지 교체 (1 페이지), 설치 지침 매뉴얼 (40 페이지), 모듈 설치 매뉴얼 (1 페이지), 하드웨어 설치 매뉴얼 (1 페이지), 트레이 모듈 설치 매뉴얼 (1 페이지), 모듈 설치 매뉴얼 (1 페이지), 설치 매뉴얼 (6 페이지)

Xerox 4150X - WorkCentre B/W Laser 빠른 참조
SERVICES:
JOB STATUS:
MACHINE STATUS:
Features* are accessible by touching All Services.
LOAD PAPER
LOAD PAPER
• Open the required
paper tray.
• Load the paper, do
not load above the
maximum fill line.
• Adjust the guides to
touch the edge of
the paper.
• Close the paper
tray, except the
Bypass Tray.
• Confirm the paper
size/type settings
on the user
interface.
For more information... 1. Press the Help button on the control panel, 2. refer to the Getting Started Guide, 3. refer
to the User Guide on the User Documentation CD, or 4. visit our website on...
Copyright © 2006 Xerox Corporation. All Rights Reserved
Displays the Services screen to enable selection of job features
Displays the job queue information
Displays machine information
FAX
QUICK FAX
• Load the original
face up in the
document handler.
• Select FAX from the
All Services screen.
• Enter the recipient
fax number using
the keypad or select
the number from the
ADDRESS BOOK.
• Touch the screen
buttons to make
feature selections.
• Press START.
WorkCentre 4150
TOUCH SCREEN -
Displays all the available
features and general machine information
CLEAR ALL -
Resets job programming to the
default settings
PAUSE -
Interrupts current printing job
START -
Starts the job
*Some features may not be available on your model.
E-MAIL
QUICK E-MAIL
• Load the original
face up in the
document handler.
• Select E-MAIL from
the All Services
screen.
• Input the E-mail
address or make a
selection from the
ADDRESS BOOK.
• Touch the screen
buttons to make
feature selections.
• Press START.
www.xerox.com/support
COPY
QUICK COPY
• Load the original
face up in the
document handler.
• Select COPY from
the All Services
screen.
• Touch the screen
buttons to make
feature selections.
• Press START.
708PXXXXX