Xerox 4150xf - WorkCentre B/W Laser 시작하기 매뉴얼 - 페이지 23

{카테고리_이름} Xerox 4150xf - WorkCentre B/W Laser에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 4150xf - WorkCentre B/W Laser 38 페이지. Network scanning - wia configuration
Xerox 4150xf - WorkCentre B/W Laser에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 빠른 참조 (1 페이지), 카트리지 교체 (1 페이지), 설치 지침 매뉴얼 (40 페이지), 모듈 설치 매뉴얼 (1 페이지), 하드웨어 설치 매뉴얼 (1 페이지), 트레이 모듈 설치 매뉴얼 (1 페이지), 모듈 설치 매뉴얼 (1 페이지), 설치 매뉴얼 (6 페이지), 매뉴얼 (9 페이지)

Printing a Document

Ensure that the correct Xerox WorkCentre 4150 printer driver has been installed on your

PC. To install the print drivers refer to Install Print Drivers on page 11.

You can also access the Print Drivers by referring to the CentreWare Print and Fax Services

CD or you can download the latest versions from the Xerox website at www.xerox.com/

support.

Open the document to be printed. Select File > Print and select the Xerox WorkCentre

4150 from the list of printers displayed.

To change the default printing properties select Properties.

The print driver has various tabs that

contain options and properties.

• The Advanced tab contains various

font and printing options.

• Use the Paper/Output tab to choose

the type of media, size and color and

output choices like Staple and 2 Sided

Prints.

• Image Options enables you to adjust

the look of your prints. You can reduce

and enlarge the image size, save toner

and set the resolution.

• The Layout/Watermark tab has various

options to add watermarks to pages,

change image orientation (landscape

or portrait) and enable booklet and

multi-up printing.

Choose the options for your printing job and click OK to print the document.

The print job will be sent to the WorkCentre and will appear in the Incomplete Jobs queue.

To view the queue at the WorkCentre, select the Job Status button.

getting started guide