Xerox 4150xf - WorkCentre B/W Laser 매뉴얼 - 페이지 4

{카테고리_이름} Xerox 4150xf - WorkCentre B/W Laser에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 4150xf - WorkCentre B/W Laser 9 페이지. Network scanning - wia configuration
Xerox 4150xf - WorkCentre B/W Laser에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 빠른 참조 (1 페이지), 시작하기 매뉴얼 (38 페이지), 카트리지 교체 (1 페이지), 설치 지침 매뉴얼 (40 페이지), 모듈 설치 매뉴얼 (1 페이지), 하드웨어 설치 매뉴얼 (1 페이지), 트레이 모듈 설치 매뉴얼 (1 페이지), 모듈 설치 매뉴얼 (1 페이지), 설치 매뉴얼 (6 페이지)

페이지 인쇄
Xerox 4150xf - WorkCentre B/W Laser 매뉴얼
dc07cc0418
Customer Support
Enable the SSL (Secure Socket Layer) protocol
1. In the Internet Services Properties menu, click [Connectivity, Protocols, HTTP].
2. In the HTTP Security Mode menu click [Require SSL].
3. Click [Apply] and close the acknowledgement window that opens.
4. Close your web browser and then access the Internet Services screen again. The
Security warning will display. Self-signed certificates usually cause browsers to
display messages which question the trust of the certificate. Click [OK] to continue.
Verify Scan Template Management Enabled
1. Click [Services, Scan Template Management].
2. Verify that the Scan Template Management - Enabled box is checked, if it hasn't
been enabled automatically, check the box now.
3. If prompted, enter the current tools administrator user name and password. The
default is [admin] and [1111].
Xerox WIA Drivers
Installation Requirements
The following are required for installing WIA drivers:
•
The workstation must be running the Microsoft Windows XP Professional
Operating System.
•
You must possess Administrator rights on the workstation to install the driver.
•
Domain and local user accounts are supported.
•
The workstation must have TCP/IP and HTTP enabled.
•
Simple File Sharing must be disabled on the workstation to allow for proper device
authentication.
Page 4