Xerox ColorQube 8900 series 참조 매뉴얼 - 페이지 16

{카테고리_이름} Xerox ColorQube 8900 series에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox ColorQube 8900 series 28 페이지. Color multifunction printer
Xerox ColorQube 8900 series에 대해서도 마찬가지입니다: 사양 (11 페이지), 사양 (11 페이지), 사양 (8 페이지), 사양 (11 페이지), 안전한 설치 및 운영 (11 페이지), 빠른 사용 설명서 (18 페이지), 평가자 매뉴얼 (21 페이지), 소프트웨어 업그레이드 (36 페이지), 빠른 사용 설명서 (18 페이지)

페이지 인쇄
Xerox ColorQube 8900 series 참조 매뉴얼

Hole Punch

This command indicates hole punches for a print job on a device with hole punch capability.
Note: Some hole punch options may not be available on every product model.
PJL COMMENT Command
@PJL COMMENT
OID_ATT_PUNCH int;
Where int is:
0 = Punch Off
1 = Punch On
2 = Use 2 Hole Punch
3 = Use 3 Hole Punch
4 = Use 4 Hole Punch
Note: int 1 will be emitted to invoke the default punch
setting on the device.

Fold

This command indicates an optional fold type generated by the professional finisher. The short edge feed command is
also required to use the booklet fold command.
Note: Some fold options may not be available on every product model.
PJL COMMENT Command
@PJL COMMENT
OID_ATT_FOLD string;
Where string is:
TRIFOLDC
TRIFOLDZ
ZFOLD
Note:
•
TriFold C requires a LeadingEdge 0 and/or OID_VAL_FEED_EDGE_SHORT_LEADING command to
insure SEF feeding.
•
TriFold Z requires a LeadingEdge 0 and/or OID_VAL_FEED_EDGE_SHORT_LEADING command.
CQ8700-8900
Customer Support
DSC Comment Command
%%OID_ATT_PUNCH int;
DSC Comment Command
%%OID_ATT_FOLD
OID_VAL_FOLD_string;
PS
<< /Punch int1 /PunchDetails << /Type 6
/NumHoles int2 >> >> setpagedevice
Where int1 is:
0 = Punch Off
4 = Punch On (after each showpage or copy
page operation)
Where int2 is:
0 = Punch Off
1 = Punch On
2 = 2 Hole Punch
3 = 3 Hole Punch
4 = 4 Hole Punch
Note: Setting NumHoles to 1 causes a punch
with the default number of holes.
PS
<< /Fold int1 /FoldDetails << /Type 5
/FoldMethod int2 >> >> setpagedevice
Where int1 is:
0 = No Fold
3 = Fold at end of set
Where int2 is:
1 = TriFold C
2 = TriFold Z
3 = Z-Fold HalfSheet
Page 16