Xerox ColorQube 9301 설치 및 운영 매뉴얼 - 페이지 3

{카테고리_이름} Xerox ColorQube 9301에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox ColorQube 9301 14 페이지. Multifunction printer
Xerox ColorQube 9301에 대해서도 마찬가지입니다: 관리 및 회계 (38 페이지), 빠른 매뉴얼 (12 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 부록 (11 페이지), 평가자 매뉴얼 (24 페이지)

페이지 인쇄

1. Secure Installation/Set-Up in Evaluated Configuration

•

Secure Print

•

Hold All Jobs

System Administrator login is required when accessing the security features via the Web User Interface (Web UI) or

when implementing the guidelines and recommendations specified in this document. To log in to the Web UI as an

authenticated System Administrator, follow the instructions under "Accessing CentreWare Information Services as a

System Administrator" under "Accessing Administration and Configuration Settings" in Section 2 of the applicable

System Administration Guide (SAG)

To log in to the Local User Interface (denoted hereafter in this document as the Control Panel) as an authenticated

System Administrator, follow "Accessing the Control Panel as a System Administrator" under "Accessing Administration

and Configuration Settings" in Section 2 of the SAG.

Follow the instructions located in Chapter 4, Security, in the SAG to set up the security functions listed in Item a above.

Note that whenever the SAG requires that the System Administrator provide an IPv4 address, IPv6 address or port

number the values should be those that pertain to the particular device being configured.

In setting up the device to be in the evaluated configuration, perform the following

1. Administrator Password:

i. Change the Administrator password upon installation. Reset the Administrator password periodically.

Set the Administrator password to a minimum length of eight alphanumeric characters.

•

Change the Administrator password once a month and

•

Ensure that all passwords are strong passwords (e.g., passwords use a combination of alphanumeric and

•

non-alphanumeric characters; passwords don't use common names or phrases, etc.).

To change the Administrator password from the Web UI, follow the instructions under "Changing the System

Administrator Password" in Section 2 of the SAG.

To change the Administrator password from the Control Panel, follow the instructions under "Changing the

System Administrator Password at the Control Panel" in Section 2 of the SAG.

ii.

Disable the Admin Password Reset security feature so it is not used. To disable this feature, perform the

following:

At the Web UI select the Properties tab.

•

Select the following entries from the Properties 'Content menu': Security

•

Policy

Select the [Disable Password Reset] option and then select the [Apply] button to save the option entered.

•

2. Authentication:

Establish local authentication at the device by following the "Configuring Local Authentication Settings"

instructions in Section 4 of the SAG.

Set up unique user accounts with appropriate privileges on the device for all users who require access to the

device by following the "User Database" instructions in Section 4 of the SAG.

ii.

Establish network (remote) authentication access to network accounts by following the "Configuring Network

Authentication Settings" instructions in Section 4 of the SAG to set up an Authentication Server.

In the evaluated configuration the only allowable Authentication Types are Kerberos (Solaris), Kerberos

(Windows) or LDAP.

When configuring network authentication using LDAP/LDAPS enable SSL by following the instructions in Step

3 for "Configuring LDAP Server Optional Information" under "LDAP" in Section 3 of the SAG, making sure that

Enable SSL (Secure Socket Layer) under SSL is selected.

iii.

Establish user authentication via a Smart Card by following either the "Configuring Smart Card Authentication

Settings" instructions in Section 4 of the SAG or the "Software Configuration" instructions starting on page 18

of the Smart Card Installation and Configuration Guide

Xerox

WorkCentre

5845 / 5855 / 5865 / 5875 / 5890 System Administrator Guide, Version 1.0: February 2013; Xerox

7225 System Administrator Guide, Version 1.0: April 2013; Xerox

February 2013; Xerox

ColorQube

The instructions for setting up the device in the Evaluated Configuration assume that the System Administrator has been successfully

authenticated as a System Administrator at either the Control Panel or Web UI following the instructions in section I.a of this document..

9301 / 9302 / 9303 Xerox ConnectKey Controller System Administrator Guide, Version 1.0: February 2013.

WorkCentre

7800 Series System Administrator Guide, Version 1.0:

Admin Password

WorkCentre

Reset

7220 /