Xerox ColorQube 9302 관리 및 회계 - 페이지 11
{카테고리_이름} Xerox ColorQube 9302에 대한 관리 및 회계을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox ColorQube 9302 38 페이지. Multifunction printer
Xerox ColorQube 9302에 대해서도 마찬가지입니다: 사양 (8 페이지), 사양 (12 페이지), 빠른 매뉴얼 (12 페이지), 사양 (11 페이지), 사용자 설명서 (14 페이지), 설치 및 운영 매뉴얼 (14 페이지), 사용자 설명서 부록 (11 페이지), 평가자 매뉴얼 (24 페이지)
페이지 인쇄
Auto Resume Timer
If the device is stopped during a job, this
feature determines if the device
automatically resumes the job after a set
period of time or whether it waits for user
intervention to resume the job. This can
prevent a user leaving the device in a
stopped or paused state.
•
Auto Resume is selected to
automatically resume stopped
operations at the time designated.
Select the period of time the device
waits before resuming using the arrow
buttons, between 15 and 120 seconds.
•
Wait for User instructs the system to remain stopped until a user selects Resume or Cancel.
Held Job Timeout
Use this option to enable the device to
delete jobs which have been held in the
job list for a specified period of time and
have been abandoned by a user. E-mail,
network scanning, incoming server fax,
embedded fax and internet fax jobs are
not affected by this setting.
•
Enable allows the device to
automatically delete held jobs after a
specified period, set the period of
time between 0 and 120 hours and 0
and 59 minutes using the arrow
buttons.
•
Disable instructs the device not to delete held jobs from the job list. The held jobs are only deleted
if the device is switched off.
System Timeout
Use to set whether the device should return to the default screen and feature settings after a set period
of time.
•
Enable instructs the device to timeout after the specified period of time. Select the period of time
between 1 and 10 minutes using the slide bar.
•
Disable should be selected if you do not want the device to automatically return to the default
settings after a set period of time.
ColorQube™ 9301/9302/9303
Administration and Accounting
Device Settings
277