Xerox ColorQube 9303 관리 및 회계 - 페이지 9
{카테고리_이름} Xerox ColorQube 9303에 대한 관리 및 회계을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox ColorQube 9303 38 페이지. Multifunction printer
Xerox ColorQube 9303에 대해서도 마찬가지입니다: 사양 (8 페이지), 사양 (12 페이지), 빠른 매뉴얼 (12 페이지), 사양 (11 페이지), 사용자 설명서 (14 페이지), 설치 및 운영 매뉴얼 (14 페이지), 사용자 설명서 부록 (11 페이지), 평가자 매뉴얼 (24 페이지)
페이지 인쇄
Paper Substitution
Enables the device to automatically
substitute common US and metric paper
sizes when printing.
•
Nearest Match is used to
automatically substitute the paper
sizes shown on the screen if they are
not available e.g. if an A4 document is
received for printing and only 8.5x11"
paper is available, the device
substitutes 8.5x11" for A4. If Disable
is selected the device does not
substitute the sizes shown. In this
instance, a job would be held in the job list until the correct paper size is loaded.
•
Replace 8.5 x 14" is used to automatically substitute 8.5x14" paper with A3 or 11x17" if 8.5x14"
paper is requested but is not available. If Disable is selected the device does not substitute the
paper.
Paper Size Preference
This option is used to select the most frequently used paper size formats.
•
Inches for formats such as 8.5x11" or 11x17".
•
Metric for formats such as A4 or A3.
Tray Settings
Use to apply attributes to each paper tray
so they operate productively in your own
working environment. You can assign trays
as dedicated to a specific paper size and
type, and setup Auto Selection and the
selection Priority of each tray.
•
Select the tray required and select
Change Settings.
•
Select the Tray Type required:
•
Dedicated is set to contain one
size and type of media only and
cannot be adjusted by the user.
•
Adjustable is selected if the tray can be adjusted by the user to contain any media within
specification. This option may not be available for all trays.
•
Select the setting required and select Save.
•
Priority is used to indicate which tray is selected if trays contain the same media, it also
determines in which order the trays are displayed on the Copy tab. Set the Tray Priority between 1
- 99. 1 is the highest priority and 99 is the lowest. Select Save.
ColorQube™ 9301/9302/9303
Administration and Accounting
Device Settings
275