Calex PCAN201WJ-5M 운영자 매뉴얼 - 페이지 5

{카테고리_이름} Calex PCAN201WJ-5M에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Calex PCAN201WJ-5M 8 페이지.

AIR/WATER COOLED HOUSING

The air/water cooled housing shown below allows the sensor to withstand high ambient temperatures.

It is equipped with two 1/8" BSP fittings. Water temperature should be 10°C to 27°C for efficient cool-

ing. Chilled water below 10°C is not recommended. To avoid condensation, the air purge collar should

be used with the water-cooled housing. Water flow rate should not be more than 0.5 to 1.5 litres/min.

1/8 BSP water/air connections

The air purge collar below is used to keep dust, fumes, moisture, and other contaminants away

from the lens. It must be screwed in fully. Air flows into the 1/8" BSP fitting and out of the front

aperture. Air flow should be no more than 5 to 15 litres/min.

Clean or 'instrument' air is recommended.

APSW

(for PCAN21)

APSN (for PCAN201)

103

1/8 BSP Air connection

Ihr Schweizer Industriepartner

M16 x 1mm

www.digiparts.ch

40.0