Xerox CopyCentre 133 네트워크 매뉴얼 - 페이지 6

{카테고리_이름} Xerox CopyCentre 133에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox CopyCentre 133 50 페이지. Xerox copycentre 133: network guide
Xerox CopyCentre 133에 대해서도 마찬가지입니다: 브로셔 및 사양 (6 페이지), 설치 매뉴얼 (2 페이지)

페이지 인쇄

The DNS setting must be entered through CentreWare Internet Services. From a workstation, open a web

browser (such as Internet Explorer), and then enter the IP address in the format http://xxx.xxx.xxx.xxx

(the xxx's represent the device IP address). If connected properly, you should see a CentreWare Internet

Services web page for your device.

Note

CentreWare Internet Services is a powerful tool for configuring the WorkCentre device remotely.

The default user name is 11111 and the password is x-admin. The user name and password are

case-sensitive and should be changed after install.

The Default Gateway, Subnet Mask, and DNS address settings can be entered via CentreWare

Internet Services if the device is on the same subnet as the workstation. To access them via CentreWare

Internet Services:

Click the Properties tab

Click the Protocols Settings folder.

Click TCP/IP.

10.

Load the print drivers on the workstations that will be accessing the device.

Note

For more detailed instructions, see the System Administrator Guide.

Xerox WorkCentre M123/M128/133

Xerox WorkCentre Pro 123/128/133

Quick Network Setup (Static IP)