Xerox D110 설치 매뉴얼 - 페이지 6
{카테고리_이름} Xerox D110에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox D110 14 페이지. Printer and copier/printer
Xerox D110에 대해서도 마찬가지입니다: 세부 사양 (8 페이지), 사양 (8 페이지), 사양 (8 페이지), 사용자 설명서 (32 페이지)
Xerox Secure Access Installation Guide
Configuring the machine to communicate with the USB card reader
Enabling the plug-in feature on the machine
1. Open an internet web browser.
2. Enter the IP address of the machine in the address field.
3. Press Enter to go to CentreWare
4. Select the Properties tab.
5. If prompted, enter the system administrator user name and password.
The default user name is admin and the default password is 1111.
6. Select OK.
7. Select the Security folder.
8. In the Security folder, select Plug-in Settings.
9. In the Plug-In Settings folder, select Plug-in Settings in the directory tree.
10. In the Plug-in Settings area perform the following steps:
a) Check the Enabled checkbox for Plug-in Settings.
b) Select Apply.
A message is displayed stating that the machine must be rebooted before the
new settings can take effect.
11. Select Reboot Machine.
A message displays asking: Do you want to reboot?
12. Select OK.
Uploading the two Equitrac Provider plug-ins
1. Open an internet web browser.
2. Enter the IP address of the machine in the address field.
3. Press Enter to go to CentreWare
4. Select the Properties tab.
5. If prompted, enter the system administrator user name and password.
The default user name is admin and the default password is 1111.
6. Select OK.
7. Select the Security folder.
8. In the Security folder, select Plug-in Settings.
9. In the Plug-in Settings folder, select List of Embedded Plug-ins (from the directory
tree).
10. Select the Upload button.
The Upload Plug-in page displays.
11. From the Upload Plug-in page perform the following:
2
®
Internet Services.
®
Internet Services.
®
Xerox
D95/D110/D125 Printer and Copier/Printer
Xerox® Secure Access Installation Guide