Booklet printing
T
O PRINT A BOOKLET FROM
Printing a booklet from Microsoft Word on Windows (PostScript printer driver)
Booklet printing requires that a finisher is installed on the copier and that the printer driver is
configured with the installed finisher. For information about configuring installable options,
see Printing from Windows .
The following procedure explains how to set the correct print options for printing an 8.5
Microsoft Word document as a booklet on 11
as a booklet on A3 paper, using the Windows PostScript printer driver.
N
:
If you print multiple copies of a booklet, make sure the Collate option in Microsoft
OTE
Word is cleared. Otherwise, all the copies will print as one booklet.
M
ICROSOFT
1 Open the document in Microsoft Word.
2 Select File>Page Setup.
3 Set the Paper Size to 8.5x11 SEF (A4 SEF) and Orientation to Portrait.
N
:
This step may change the appearance of the text on the page.
OTE
4 Select File>Print, choose the Fiery as your printer, and then click Properties.
5 In the Fiery Printing tab, open the Paper Source bar and choose the following settings:
8.5
11 SEF (A4 SEF)
Page Size:
x
11
17 SEF (A3 SEF)
Print Size:
x
6 Open the Layout bar and choose the following setting:
Portrait
Orientation:
7 Open the Finishing bar and choose the following settings:
Top-Top
Duplex:
Face Up
Face-down Printing:
Fasten Mode:
Fold or Fold and Staple
N
:
For the limitations on folding and stapling, see "Fasten Mode" on page 12.
OTE
Booklet Output Tray
Output Tray:
Saddle
Booklet Maker:
Imposition Reduction:
8 Optionally, set one or more of the following options under the Finishing bar:
• Creep Adjustment
• Centering Adjustment
• Back Cover
• Front Cover
• Cover Source
17 paper, or for printing an A4 document
x
W
W
ORD USING THE
INDOWS
Select this option
P
S
OST
CRIPT PRINTER DRIVER
Part Number: 45045321
Page 9
11
x
페이지 인쇄