Xerox Document Centre 220ST 시작하기 - 페이지 21

{카테고리_이름} Xerox Document Centre 220ST에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Document Centre 220ST 48 페이지. Scanning services

Set Up Scanning

1. Enter System Administrator Setups:

2. Access the Scan to File Setups screens and assign the Default

NOTE

The Job Template Pool and Update All Templates options located

on the Scan to File Setups screen are not used in this environment.

3. Assign the Default Repository Path:

NOTE

It is strongly recommended that you do not use a directory in the

SYS volume, since it could quickly fill up with scanned files.

Companion to Getting Started with Scanning Services

A. Press the [Access] button on the DC220/230/332/340ST

Control Panel.

B. Using the keypad, enter [ #22222] (or the current System

Administrator password) and then press [Enter] on the

Control Panel Touch Screen. You must enter the # character

before entering 22222.

Repository Server:

A. Select [Additional Setups] (if necessary) and select [Scan

To File Setups].

B. Select [Default Repository].

C. Select [NetWare].

D. Select [Server].

E. Select [Edit] and enter the name of the NetWare file server

that has the user account for the scanner. Select [Save] when

finished.

Optionally, up to four other public repositories can be setup

in addition to the Default Repository. The additional

repositories can provide password and directory path

information for templates selected with matching server and

user names.

A. Select [Directory Path] and then select [Edit] and enter the

full path, including the volume name, to the directory for the

scanner account. For example:

(volume name):\(directory name)\(directory name)

Page 2 - 5