Clarity XLC8HS 사용자 설명서 - 페이지 9

{카테고리_이름} Clarity XLC8HS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarity XLC8HS 20 페이지. Additional handset for clarity xlc8

XLC8HS

REGISTERING THE XLC8HS

The XLC8HS is compatible with select Clarity products (see page 13 for

compatible products). In order to use the XLC8HS you must register it to a

main unit.

Pull the handset's battery tab located on the bottom of the device, and

then press MENU to start registering or deregistering your handset from

your system.

TO REGISTER AN UNREGISTERED HANDSET

1. Press MENU to enter registration mode. You will see displayed on the

screen, "Handset Needs Registration."

2. Press and hold the FIND key on the main unit's base for five seconds,

until the base visual ringer starts flashing. Release FIND key on the main

unit's base.

3. Press MENU key on the handset.

4. The screen shows "Registering... ", then "Registration Successful"

(accompanied by five quick beeps).

5. Your handset is now registered to your main system. Your screen will

display "Handset X," (where "X" is the number of the actual handset

registered, such as the second or fourth handset, etc.).

You can extend the number of handsets by using additional XLC8HS

handsets (sold separately) - up to 4 handsets (total) can be registered to

a main system.

TO REGISTER YOUR HANDSET AGAIN (or to register to a different main

system)

1. In standby mode, press MENU.

2. Press DOWN arrow five times to advance the row reading "Phone Setup"

to the top of the screen.

3. Press MENU to enter the setup section. The screen displays "Register" on

the screen's top row now.

4. Press MENU to enter the Registration section.

5. Press MENU again to select "Register."

6. Follow the Registration steps listed above.

TO DEREGISTER THE HANDSET

1. See the six steps listed above, then press MENU to select Deregister."

2. Your handset will deregister from your base as soon as you press

MENU. The screen will show "Handset X Deregistered"(again, where

"X" is the number of the handset registered), then "Handset Needs

Registration."

OPERATING INSTRUCTIONS