Clarity C4220+ 사용자 설명서 - 페이지 6

{카테고리_이름} Clarity C4220+에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarity C4220+ 18 페이지. Extra loud cordless speakerphone with caller id
Clarity C4220+에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

WALL MOUNTING YOUR C4220+

C4220+

Wall mount your telephone as shown on the enclosed Quick Start guide.

(This is optional.)

1. Follow the instructions in the Installation section on page 6 to remove

the base and handset from the base – steps 1, 4, 6.

2. Unplug the long phone line cord from the phone jack located on the

back of your C4220+. Plug one end of the short phone line cord into

the same jack identified by LINE on the back of your base.

3. Install the C4220+ base onto the wall mount bracket as shown on page

9. Guide the short phone cord through the wall mount bracket as

shown in the diagram.

4. Using a screwdriver, loosen the screws on your phone wall outlet (1-2

turns).

5. Plug the loose end of the short phone cord into the wall phone outlet.

6. Attach the wall mount bracket (with the C4220+ base) onto the wall

phone outlet.

7. Plug the power adapter into a wall electrical outlet.

8. Pull the handset's battery tab located on the bottom of the device in

the direction of the arrow.

9. Place the handset in the base and allow 10 hours for full charge.

WALL MOUNTING YOUR C4220+

C4220+