Xerox WorkCentre Pro 635 보충 설명서
{카테고리_이름} Xerox WorkCentre Pro 635에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WorkCentre Pro 635 2 페이지. Copying documents
Xerox WorkCentre Pro 635에 대해서도 마찬가지입니다: 수리 매뉴얼 (4 페이지), 설치 매뉴얼 (1 페이지), 사용자 설명서 (14 페이지), 기능 설명서 (4 페이지), 사용자 설명서 (9 페이지)
페이지 인쇄
Document WorkCentre Pro 635, 645, 657
Power Saver Setting
The Power Saver function allows you to turn the power off to save
power consumption. If the Power Saver function is On, a warm up
period is needed before printing occurs. There are two Power Save
modes with this machine, Super Power Save and Printer Power
Save.
•
Super Power Save - Turns all the power off to minimize power
consumption. Select one of three modes, Automatic, Manual or
Off:
Automatic mode: Enters the Power Saver Mode automatically
Manual Mode:
Off:
1. Press:
Menu
3
2. Select the Super Power Save mode:
To select the Automatic mode, press
To select the Manual mode, press
To select Off, press
Programming the Machine
when in the Standby Mode for the pre-set time
period.
Enters the Power Saver Mode when the Power
Save key on the control panel is pressed. If the
machine is in the Standby Mode when the
Power Save key is pressed, it enters the
Power Saver Mode immediately. If the Power
Save key is pressed while the machine is not in
the Standby Mode, it enters the Power Saver
Mode after returning to the Standby Mode.
Disables the Super Power Saver mode and the
Printer Power Saver mode button on the
control panel.
1 1
0
Super power save
1. Automatic
2. Manual
3. Off
1 1
2
3
. Then, go to Step 4.
7
. Then, go to Step 3.
. Then, go to Step 4.
4-45