Xerox WorkCentre XE90 보충 설명서 - 페이지 6

{카테고리_이름} Xerox WorkCentre XE90에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WorkCentre XE90 7 페이지. Xerox workcentre xe90: supplementary guide

Your WorkCentre and supplies have been designed and tested to meet strict safety requirements.

These include safety agency examination and approval, and compliance to established

environmental standards. Please read the following instructions carefully before operating the

WorkCentre and refer to them as needed to ensure the continued safe operation of your

WorkCentre.

Follow all warnings and instructions marked on or supplied with the product.

Symbology:

= High Voltage,

= Heated Surface,

= Warning

= Laser Caution use of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.

Unplug this WorkCentre from the wall outlet before cleaning. Always use materials specifically

designated for this WorkCentre. Use of other materials may result in poor performance and could

create a hazardous situation.

Do not use aerosol cleaners. Follow the instructions in this User Guide for proper cleaning

methods.

Never use supplies or cleaning materials for purposes other than what they were intended. Keep

all supplies and materials out of reach of children.

Do not use this WorkCentre near water, wet locations, or outdoors.

Do not place this WorkCentre on an unstable cart, stand, or table. The WorkCentre may fall,

causing personal injury or serious damage to the WorkCentre.

This product is equipped with a 3-wire grounding type plug (e.g., a plug having a third grounding

pin). This plug will fit only into a grounding-type power outlet. This is a safety feature. To avoid risk

of electric shock, contact your electrician to replace the receptacle if you are unable to insert the

plug into the outlet. Never use a grounding adapter plug to connect the WorkCentre to a power

source receptacle that lacks a ground connection terminal.

This WorkCentre should be operated from the type of power source indicated on the marking label.

If you are not sure of the type of power available, consult your local power company.

Do not allow anything to rest on the power cord. Do not locate the WorkCentre where persons will

step on the cord.

The power supply cord is the disconnect device for this equipment. Insure that installation is

near the outlet and is easily accessible.

Your machine is equipped with an energy saving device to conserve power when the machine is not

in use. The machine may be left on continuously.