Xerox 2006NPC - DocuColor Color Laser 매뉴얼 - 페이지 9

{카테고리_이름} Xerox 2006NPC - DocuColor Color Laser에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 2006NPC - DocuColor Color Laser 17 페이지. Product brochures
Xerox 2006NPC - DocuColor Color Laser에 대해서도 마찬가지입니다: 매뉴얼 (27 페이지), 유지 관리 매뉴얼 (19 페이지), 매뉴얼 사용 (9 페이지), 지침 (4 페이지)

Xerox 2006NPC - DocuColor Color Laser 매뉴얼

Configuring a Windows NT 4.0 server

Use the following procedure to configure a Windows NT 4.0 server to
communicate with the DocuColor 2006. Basic steps include:
Load the TCP/IP network protocol and configure it with an IP
address, Subnet Mask, and Gateway.
Enter the host name of the DocuColor 2006 in the host database
Perform Printer Setup.
On the Windows NT 4.0 server, create a printer for each print
connection, install the appropriate printer drivers, and (optionally)
share the printer on the network.
Enter the host name and remote printer name of the DocuColor
2006 in the printer connection.
If the Windows NT 4.0 server is also a workstation, install the
Fiery utilities.
More detail is provided in subsequent chapters and in your Microsoft
documentation.
Adding the DocuColor 2006 to the TCP/IP network
(Windows NT 4.0)
If your TCP/IP network consists of Windows NT 4.0 servers and
Windows NT 4.0 clients, perform the following procedure.
1.
Register the IP address of the printer in the host name database
used by your system.
For installations that do not have a system administrator or a
central host name database, add the printer to the hosts file on
the Windows NT 4.0 server.
Add the printer to the hosts file on any workstations that have
TCP/IP loaded and will use the Fiery utilities.
Xerox DocuColor 2006
8. Setting up the network server
8–9