Xerox 460 빠른 설치 매뉴얼 - 페이지 32

{카테고리_이름} Xerox 460에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 460 38 페이지. Macintosh driver information
Xerox 460에 대해서도 마찬가지입니다: 정보 매뉴얼 (13 페이지)

페이지 인쇄
Xerox 460 빠른 설치 매뉴얼
EquiTrac OfficeTrac Network Accounting Quick Install Card
Xerox Document Centre 460/470 ST
4.
Perform the Network Accounting Setup
a)
Press the Network Accounting
Setup button.
b)
Press the Enabled button.
c)
Press the Save button to retain the
settings and continue.
d)
Press the Exit Tools button.
5.
Verify Accounting is enabled
a)
Press the Job Status button on the
front panel then press the Features
button.
b)
The Touch Panel should display a
screen with two buttons. One is the
User ID button and the other is the
Account ID button. This indicates the
system has enabled accounting
successfully.
Go to the OfficeTrac server and...
1.
Activate the Document Centre Site
Setup
a)
Open the Terminal Status screen.
Verify that the Document Centre is
displayed as dcsOnLine.
Troubleshooting information is
contained in the OfficeTrac
Administrators documentation.
2.
Proceed to the next section of this
procedure called Go to the workstations
and...
Go to the workstation and...
1.
Install Print drivers (If print drivers have
not already been installed, use the
CentreWare Network Services CD-ROM
to install print drivers. Details for this are
found in the document supplied with your
printer entitled Network Services Guide)
Workstations with existing Document
Centre drivers must be upgraded to the
new drivers to allow for printing with
Network Accounting enabled.
2.
Enable Accounting in the print driver
a)
At your Windows 95/98/NT 4.0
desktop, click the Start button and
select Settings.
b)
From the cascade menu select
Printers.
c)
Select a printer with the right mouse
button.
d)
Select the Properties entry in the
cascade menu.
e)
Select the User Preferences tab on
the Properties dialog.
f)
Click the Enable Accounting
checkbox.
g)
If you do not want users to have to
enter their User and Account ID each
time they print, select the Save
Accounting Codes checkbox.
Page 2
h)
If desired you may also select the
Conceal User ID and Conceal
Account ID checkboxes to have the
asterisk (*) character echoed when
this information is entered.
i)
When finished making selections, click
OK to close the driver and save the
settings.
3.
Test the accounting function of the
driver
a)
Open an application and print a job.
Verify that you are presented with the
User ID and Accounting ID screen.
b)
Enter a valid User and Accounting ID
and click OK (If you selected Save
Accounting Codes it will only
necessary to enter this information the
first time the driver is used).
c)
If your print job does not print, try to
copy a job at the Document Centre
using the same Account and User ID.
If the copy job completes then the
Account and User ID are valid.
d)
It may be necessary to check the
OfficeTrac server configuration to
verify the proper User ID and Account
ID.
e)
Repeat this Go to the workstation
and... procedure for each workstation
on the network that will print to the
printer.