Xerox 470 빠른 설치 매뉴얼 - 페이지 34

{카테고리_이름} Xerox 470에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 470 38 페이지. Macintosh driver information
Xerox 470에 대해서도 마찬가지입니다: 정보 매뉴얼 (13 페이지)

페이지 인쇄
Xerox 470 빠른 설치 매뉴얼
RightFAX (FTP over TCP/IP) Quick Install Card
Xerox Document Centre 460/470 ST
c)
Use the touch screen keyboard to
enter the login name for the account
created for the Document Centre.
(observe case sensitivity)
d)
Press Save to retain the settings.
4.
Set the password used by your
Document Centre to connect to the fax
repository
a)
Press the Password button and the
Password screen will appear.
b)
Press the Password button.
c)
Use the touch screen keyboard to
enter the password for the account
created for the Document Centre.
(observe case sensitivity)
d)
Press Save to retain the settings.
e)
Press Save again to be returned to the
Fax Repository Settings screen.
5.
Set the path for the Fax Repository
a)
Press the Path button.
b)
The Path screen will appear. Press
the Path button.
c)
Use the touch screen keyboard to
enter the path to the Fax Repository
created for the Document Centre
(observe case sensitivity).
d)
Press Save again to be returned to the
Fax Repository Settings screen.
6.
Set the server address to which fax
documents will be sent
a)
Press the Server button.
b)
Press the soft buttons on the Touch
Screen one at a time for each octet of
the server TCP/IP address and enter
the numbers from the keypad. When
finished press the Save button. You
will be returned to the Fax Repository
Settings screen.
7.
Exit the Tools Menu
a)
Press the Exit Tools button.
Go to the RightFAX server and...
1.
Set the RightFax server options for
receiving Document Centre fax
documents (Refer to the documentation
provided with your RightFAX server)
a)
Open the WorkServer Control Panel.
b)
Select the appropriate WorkServer
then select Xerox Configuration.
c)
Enable the Xerox DCS Interface.
d)
Add the path and home directory of
the Fax Repository that will be
monitored by the RightFax server.
e)
Close the WorkServer Control Panel.
f)
Open Enterprise Fax Manager.
Page 2
g)
Create a Mailbox for the Document
Centre (Walkup, Anonymous or
Default).
Go to the workstation and...
1.
Install the new upgraded print drivers
a)
Test your installation by opening an
application and print a test fax
document and verify its receipt.
b)
If your fax document does not reach its
destination refer to the troubleshooting
information in the RightFax
documentation.