Xerox C11 - DocuPrint Color Inkjet Printer 소프트웨어 설명서 - 페이지 20

{카테고리_이름} Xerox C11 - DocuPrint Color Inkjet Printer에 대한 소프트웨어 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox C11 - DocuPrint Color Inkjet Printer 47 페이지. Platen cover
Xerox C11 - DocuPrint Color Inkjet Printer에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 모듈 매뉴얼 (2 페이지), 빠른 설치 카드 (2 페이지), 매뉴얼 (28 페이지), 스탠드 설치 매뉴얼 (4 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (1 페이지), 설치 매뉴얼 (1 페이지)

3 Operation with Windows NT 4.0

Advanced Tab Settings

This section describes the settings of Printer Features in the Advanced tab.

Select the items from Printer Features under Document Options of the Advanced tab

and change the settings in the Change Setting box at the bottom of the tab.

NOTE: The settings that can be selected vary depending on which options have been

installed. Change these settings only after confirming that the option settings are

complete. See Device Settings Tab Settings on page 18.

Offset Stacking - The position of individual jobs or sets of copies are shifted to either

side of the output tray to enable easy separation.

Feed Separators from - Specifies the paper tray that transparency dividers are to be

fed from. When [Auto] is selected, the tray set on the machine is used as the feed

destination.

Print on Separators - Specifies whether or not to print on the transparency dividers as

well as the transparency.

Paper Type (Separators) - Specifies a paper type for the transparency divider.

Bypass Feed Orientation - Specifies the paper orientation when printing from the

bypass tray. When feeding the short edge of the paper first, select [Landscape]. When

feeding the long edge of the paper, select [Portrait].

Xerox WorkCentre 118 Postscript® User Guide