Xerox ColorQube 9203 빠른 사용 설명서 - 페이지 10
{카테고리_이름} Xerox ColorQube 9203에 대한 빠른 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox ColorQube 9203 38 페이지. Mfp
Xerox ColorQube 9203에 대해서도 마찬가지입니다: 설치 및 작동 지침 (14 페이지), 평가자 매뉴얼 (28 페이지), 빠른 매뉴얼 (8 페이지), 빠른 매뉴얼 (16 페이지), 빠른 매뉴얼 (33 페이지), 안전한 설치 및 운영 (12 페이지), 안전한 설치 및 운영 (12 페이지), 사본을 만드는 방법 (9 페이지)
페이지 인쇄
Load Paper into the Paper Trays
Energy Saver Options
The device is designed to be energy efficient and automatically reduces its
power consumption after periods of inactivity. The System Administrator can
setup the following Energy Saver options.
•
Intelligent Ready wakes up and sleeps automatically based on previous
usage. The device uses algorithms and data gathered on a usage profile
to anticipate periods when the device is likely to be busy. Using this
information it automatically wakes up the device.
Job Activated wakes up when activity is detected.
•
•
Scheduled wakes up and sleeps at set times on a daily basis. The device
can be set to wake up when activity is detected, or a specific time can be
entered.
•
Fast Resume reduces the time taken to wake up. This changes the default
sleep / low power timeouts and increases energy usage.
For information about setting up the Energy Saver options, refer to the System
Administrator Guide.
Load Paper into the Paper Trays
1.
Open the Paper Tray and load paper into
the tray. Do NOT fill above the Max line.
2.
Adjust the guides to hold the paper
against the side of the tray.
3.
When you close the tray, the Paper Settings screen is displayed. Input the
size, type and color of the paper you have loaded and touch Confirm.
Note:
A paper jam may occur if a tray is opened while it is being used to
feed stock. Do not open Tray 1 if Tray 2 is open.
For further information about loading paper and paper trays, refer to the User
Guide.
10
ColorQube™ 9201/9202/9203
Quick Use Guide