Xerox DocuColor 252 릴리스 노트 - 페이지 10
{카테고리_이름} Xerox DocuColor 252에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuColor 252 41 페이지. Docucolor advanced multifunction
Xerox DocuColor 252에 대해서도 마찬가지입니다: 기능 설명서 (12 페이지), 사용자 설명서 (32 페이지), 사양 (8 페이지), 평가자 매뉴얼 (14 페이지), 평가자 매뉴얼 (16 페이지)
페이지 인쇄
Page 10
Date and time stamps for jobs
You should set the time and date on the Fiery Color Server, which will control the time
N
:
OTE
and date on copier.
You can print the following reports:
• Job Status
• Scan Mode Settings
• Copy Mode Settings
• Network Controller Jobs Report
All jobs in Job Status, Scan Mode Settings, and Copy Mode Settings use the date and time
on the copier.
You can print the following reports from Network Controller Jobs Report:
• Job History Report
• Error History Report
• Fonts List
• System Settings List
The Job History Report, Fonts List, and System Settings List use the date and time on the
Fiery Color Server. The Error History Report uses the date and time on the copier (except for
error codes from the Fiery Color Server).
Time Server IP/Name
When you specify "pool.ntp.org" from the copier touch panel(Setup > General > Time
server), the Configuration displays "World" as the Time Server IP/Name., which is correct for
pool.ntp.org (the Worldwide time server). All the other settings are regional.
Daylight Savings Time
In WebTools, the option to automatically adjust the clock for daylight saving time appears
grayed-out, however, the option functions and is automatically enabled.
On the copier touch panel, there is no Daylight Savings Time option. The Daylight Savings
Time adjustment is automatically enabled in WebTools.