Xerox DocuColor 5750 보충 설명서 - 페이지 7

{카테고리_이름} Xerox DocuColor 5750에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuColor 5750 10 페이지. Digital color printer / copier
Xerox DocuColor 5750에 대해서도 마찬가지입니다: 참조 매뉴얼 (8 페이지), 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (9 페이지), 보충 설명서 (8 페이지), 서비스 매뉴얼 (40 페이지), 시작하기 매뉴얼 (46 페이지), 매뉴얼 (9 페이지)

Non-imageable

area

Printing from

MSOfﬁce 95 with

Windows 95

Tray selection

On MajestiK and Regal color copiers, the Fiery XJ non-imageable area is 8mm on the

leading edge, and 3mm on the trailing, near, and far edges; on the 5750 color copier, the

Fiery XJ non-imageable area is 5mm on the leading and trailing edges, and 3mm on the

near and far edges.

Color Rendering Dictionaries (CRDs) are generally not used when printing from

PostScript Level 1 applications. However, for the Microsoft Ofﬁce 95 suite of applications,

you are able to use PostScript Level 2 CRDs. In the Color Printer Job Notes dialog box,

choose Enable PostScript Level 2: For MSOffice Only .

Tray selection is supported on 5750/MajestiK/Regal color copiers and allows you to select a

particular tray from which to draw paper. Tray selection is valid for the current job only.

Depending on the copier model, the following options are available:

• 5750—Auto Select, Tray 1, Tray 2, Tray 3, Tray 4, Manual Feed

• MajestiK—Auto Select, Tray 1, Tray 2, Tray 3, Manual Feed

• Regal—Auto Select, Tray 1, Tray 2, Tray 3, Manual Feed

If paper loaded in the selected tray is a different size, orientation, and/or media type

OTE

than that of the job you are sending, the Fiery XJ displays an error message and the job does

not print. You should then load the correct paper in the selected tray or cancel the job.

Other error messages (in addition to the error messages listed in Appendix A of the

User Guide ) may appear on the Fiery XJ Control Panel:

Message

Corrective action/additional information

Ld ___ in tray 4

The copier's tray 4 is not loaded with the paper size speciﬁed.

(5750 only)

The Fiery XJ will print when tray 4 is loaded with the required

paper.

Tray 4 has been selected as the paper source, but the copier

No tray 4

(5750 only)

does not have a Tray 4. Check and reconﬁgure the copier's

Installable Options if necessary.

Page 7