Xerox Regal 5790 사양 - 페이지 2
{카테고리_이름} Xerox Regal 5790에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Regal 5790 7 페이지. Digital color copier/printer materials usage guide
Xerox Regal 5790에 대해서도 마찬가지입니다: 보충 설명서 (1 페이지), 참조 매뉴얼 (7 페이지), 참조 매뉴얼 (7 페이지), 시작하기 매뉴얼 (46 페이지), 참조 매뉴얼 (18 페이지), 참조 매뉴얼 (44 페이지)
페이지 인쇄
Xerox 5790 (Regal) Digital Color Copier/Printer
THRUPUT
THRUPUT
Tray
Size*
1
8x10 to
11x17
2
8x10 to
11x17
3
8x10 to
11x17
Bypass
8x10 to
11x17
* Cassette size is set by the Xerox technical
representative at install and is adjustable by the Xerox
technical representative only .
** 20# paper
- Recommended paper to maximize copy quality is Xerox
Image series LX 24# (smooth bright white paper). This
paper is specifically designed to maximize image quality
and machine performance over a wide range of
environmental conditions.
- Recommended 90# index or equivalent can be run
satisfactorily. However, it is not to be expected to
match the performance of Xerox Image Series LX 24#
- Attempts to feed greater than 90# index or
recommended equivalent may cause machine damage.
Capacity**
Specified
Weights
250
16-24#
250
16-24#
250
16-24#
50
16# bond up
to 90# index
60# coated
- Xerox coated stock 32 # bond (3R5093) and 60# bond
(3R5095), which were designed for the xerographic
process, can be run satisfactorily. Coated papers are
not to be expected to match the performance of Image
Series LX paper.
- Sorter option:
- 20 bin sorted or stacked sets of the above thruput
sizes and weights at 50 sheets per bin.
- Sorter top tray will handle all above thruput sizes up
to 99 sheets.
- Output tray will handle all above thruput sizes up to 250
sheets.
Note: For more detailed information on thruput materials, please
refer to the Xerox Materials Usage Guide for Regal.
(700P99701)
COPY QUALITY
COPY QUALITY
- Color Quality is subjective and could be impacted by
lighting.
- Like any color reproduction process there will be some
variances in color quality over time.
- Copy Quality is strongly influenced by paper.
- Key Applications should be copied on the 5790 and
reviewed with the customer.
- Transparencies are non absorbent and may exhibit non
uniform density streaks in large solid areas from the
fuser agent film.
Revised November 1995