Xerox WorkCentre 5632 설치 매뉴얼 - 페이지 13

{카테고리_이름} Xerox WorkCentre 5632에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WorkCentre 5632 43 페이지. Smart card
Xerox WorkCentre 5632에 대해서도 마찬가지입니다: 빠른 사용 설명서 (22 페이지), 빠른 사용 설명서 (38 페이지), 빠른 시작 매뉴얼 (10 페이지), 평가자 매뉴얼 (28 페이지), 브로셔 및 사양 (8 페이지), 사양 (18 페이지), 사양 (20 페이지), 사양 (19 페이지)

Configuring the Smart Card

Once the Xerox Smart Card feature has been enabled on the device it can be configured using Internet

Services.

Follow the instructions below to enable and configure the Smart Card:

Access Internet Services

Open the web browser from your Workstation.

In the URL field, enter http://

followed by the IP Address of the

device. For example: If the IP

Address is 192.168.100.100,

enter the following into the URL

field: http://192.168.100.100.

Press Enter to view the Home page.

Access Properties

Select the Properties tab.

If prompted, enter the Administrator User ID and Password. The default is admin and 1111.

Select the Login button.

Configure the date and time to update automatically

Select Connectivity.

Select Protocols and then NTP.

Note:

A pop-up window may appear

requiring you to login.

Ensure the NTP Enabled box is

checked for the Network Time

Protocol option, then enter the IP

Address or the NTP Host Server

Name.

In most cases this will be your DHCP

server, and it will provide the time in

Greenwich which must be corrected

for your time zone by the GMT offset.

At the Offset of Local Time Zone option select the GMT offset that is correct for your region.

Select Apply. The device may reboot.

Note:

The sign in front of the number is important. Most of Europe is plus of Greenwich Mean

Time, while North America is minus. Please consider the implications of Daylight Savings Time

when selecting the Offset of Local Time Zone option.

Note:

If Network Time Protocol is not available, check that the time set on the device matches the

network time on the Domain Controller Authentication Server.

Installation

Xerox® Smart Card

Installation Guide