Xerox WorkCentre M118 소프트웨어 설명서 - 페이지 11

{카테고리_이름} Xerox WorkCentre M118에 대한 소프트웨어 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WorkCentre M118 47 페이지. Drum cartridge remanufacturing
Xerox WorkCentre M118에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 모듈 매뉴얼 (2 페이지), 빠른 설치 카드 (2 페이지), 빠른 설정 매뉴얼 (5 페이지), 빠른 설정 매뉴얼 (5 페이지), 매뉴얼 (28 페이지), 스탠드 설치 매뉴얼 (4 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (1 페이지), 설치 매뉴얼 (1 페이지), 시작하기 매뉴얼 (25 페이지), 평가자 매뉴얼 (12 페이지), 서비스 매뉴얼 (12 페이지), 재제조 지침 (14 페이지)

Offset Stacking - The position of individual jobs or sets of copies are shifted to either

side of the output tray to enable easy separation.

Feed Separators from - Specifies the paper tray that transparency dividers are to be

fed from. When [Auto] is selected, the tray set on the machine is used as the feed

destination.

Print on Separators - Specifies whether or not to print on the transparency dividers as

well as the transparency.

Paper Type (Separators) - Specifies a paper type for the transparency divider.

Collated - Selects whether to collate a multiple-page file per set when they are printed.

Halftone - Select the halftone settings for printing.

Select [Fine Dots] for the small size halftone dot commonly used in PostScript.

Select [Thick Dots] for coarser dots than the Fine Dots setting.

Select [Type 3] for the same halftone setting that is used in PCL.

Custom Paper Auto Orientation - Specifies whether or not to correct the orientation

of the custom paper.

Substitute Tray - Specifies what action to take when the paper for the print size is not

loaded in the machine.

Use Printer Settings - Use the printer settings. The settings can be confirmed on

the control panel.

Display Message - Display paper supply messages on the control panel. Printing

is impossible until paper is supplied.

Use Nearest Size (Adjust to Fit) - Selects the nearest paper size and automatically

adjusts the image size as necessary.

Use Nearest Size (No Zoom) - Selects the nearest paper size and prints the same

size as the image.

Use Larger Size (Adjust to Fit) - Selects paper larger than the original and

automatically adjusts the image size as necessary.

Use Larger Size (No Zoom) - Selects paper larger than the original and prints the

same size as the image.

Available Printer Memory - Enter the amount of usable printer memory (in KB) in the

Edit box. Usually, it is not necessary to change this.

Available Font Cache - Enter the amount of memory available for the font cache (in

KB) in the Edit box. Usually, it is not necessary to change this.

Account Mode - Specifies if all users or only Administrators can change authentication

related settings.

Xerox WorkCentre 118 Postscript® User Guide

2 Operation with Windows 95, Windows 98 and Windows Me