Xerox WorkCentre Pro 265 보충 설명서 - 페이지 9

{카테고리_이름} Xerox WorkCentre Pro 265에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WorkCentre Pro 265 20 페이지. Xerox multifunction printers specification
Xerox WorkCentre Pro 265에 대해서도 마찬가지입니다: 참조 매뉴얼 (27 페이지), 사양 (21 페이지), 평가자 매뉴얼 (27 페이지), 빠른 매뉴얼 (21 페이지)

페이지 인쇄

Copying onto tabs

This chapter describes how to copy onto tab stock.

Setup

Refer to the Section 2, Setup on page 3 and:

Load the tab stock into the Bypass Tray, Tray 1 or Tray 2

Create your tab master pages

Program Inserts

Tab dividers are copied using the Insert feature. This feature enables different types

of stock to be automatically inserted into a set. Up to 40 inserts can be added per copy

set.

Note:

– If your original document contains printed tab dividers that you wish to copy,

– The Insert feature can only be used with 1-1 or 2-2 sided copying and is not

– The Cover feature can also be selected to create a finished document with

– If your original document has more than 70 pages or mixed output

From the Basic Copying

screen select either 1 - 1 sided

or 2 - 2 sided copying.

Select the paper tray that

contains the stock you want to

use for the body of the

document which should be in

either Trays 3 or 4.

Select the Job Assembly tab.

Xerox CopyCentre, WorkCentre, WorkCentre Pro 232/238/245/255/265/275 Tab Supplement

refer to Copying using Build Job on page 12.

available when Auto Paper is selected.

covers front and back and printed tab dividers.

requirements, you will need to use the Build Job feature. Select Job

Assembly > Build Job > On > Save. You will need to split your original

document into segments and program the Inserts feature for each segment.