Xerox WorkCentre Pro 75 시스템 관리 매뉴얼 - 페이지 26
{카테고리_이름} Xerox WorkCentre Pro 75에 대한 시스템 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WorkCentre Pro 75 30 페이지. Pdl reference guide
Xerox WorkCentre Pro 75에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지), 사용자 설명서 (24 페이지), 네트워크 설치 매뉴얼 (42 페이지), 참조 매뉴얼 (22 페이지)
페이지 인쇄
Security
Page 1 - 14
Image Overwrite is available upon request. When available,
the overwrite components are enabled by the Machine
Administrator.
Immediate Image Overwrite ensures that all information
related to a job is immediately overwritten after the successful
completion of each job. You can view job overwrite status at
the machine using the Job Status pathway button located on
the User Interface. The system will display a fault message
and instructions if the overwrite was unsuccessful.
On Demand Image Overwrite irretrieveably overwrites all of
the physical areas of the disks that hold data. All jobs in the
active queue will be deleted and overwritten. Jobs sent during
the overwrite process are held and released after the
overwrite process has finished.
NOTE: Before you Start - Verify the Ethernet connection is
complete, the desired speed is set and all faults, messages
and jams are cleared.
Immediate Image Overwrite...
Go to the WorkCentre Pro and...
1. Enter the Tools pathway.
a) Press the Access (
b) On the keypad enter 1111 or the current password.
Press Enter. The Touch Screen will be used for the
remainder of the data entry, unless instructed
otherwise.
2. Enter setup menus
a) Press More
b) Press Configuration and Setup.
c) Press Optional Services.
d) Press Overwrite Security.
Xerox WorkCentre Pro System Administration Guide Supplement
or
) button.