Xerox 5400DX - Phaser B/W Laser Printer 빠른 설치 매뉴얼 - 페이지 36
{카테고리_이름} Xerox 5400DX - Phaser B/W Laser Printer에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 5400DX - Phaser B/W Laser Printer 40 페이지. 1000-sheet stacker
Xerox 5400DX - Phaser B/W Laser Printer에 대해서도 마찬가지입니다: 기술 지침 (5 페이지), 매뉴얼 (11 페이지), 설치 지침 (2 페이지), 종이 매뉴얼 (2 페이지)
페이지 인쇄
Dynamic addressing (RARP/BOOTP)
The TCP/IP address is assigned automatically by the Server. Follow
the steps below:
Press Menu Up or Menu Down until you see:
1.
Menus
Ethernet Menu
2.
Press Item Up or Item Down until you see:
Ethernet Menu
IP Address Res.
3.
Press Value Up or Value Down until you see:
IP Address Res.
BOOTP/RARP
Press Enter.
4.
5.
Update the RARP/BOOTP server's /etc/bootptab files with the
printer's hardware and IP address. In order to communicate with
the printer using the hostname rather than the IP address, update
the /etc/hosts file with the printer's IP address and hostname (IP
hostname from the configuration sheet).You can also update the
/etc/ethers file using the printer's hardware address and
hostname.
6.
Power off the Printer.
7.
Power the printer on and allow time for an IP address to be
assigned by the RARP/BOOTP server (this time may vary
depending on network traffic).
8.
Perform the steps contained in the section of this document
entitled Appendix A: Print the Configuration Sheet.
9.
Obtain the TCP/IP address from the Configuration Sheet.
30
Xerox Phaser 5400 Laser Printer