Xerox 5400DX - Phaser B/W Laser Printer 매뉴얼 - 페이지 3

{카테고리_이름} Xerox 5400DX - Phaser B/W Laser Printer에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox 5400DX - Phaser B/W Laser Printer 11 페이지. 1000-sheet stacker
Xerox 5400DX - Phaser B/W Laser Printer에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (40 페이지), 기술 지침 (5 페이지), 설치 지침 (2 페이지), 종이 매뉴얼 (2 페이지)

페이지 인쇄

Xerox 5400DX - Phaser B/W Laser Printer 매뉴얼

XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS

1. New toner (820g) for use in Phaser 5400

2. New drum for use in Phaser 5400

3. Replacement cartridge pins

4. New replacement chip

5. New doctor blade (optional)

6. New magnetic roller sleeve (optional)

7. Sealing strip

8. Cotton swabs

9. Isopropyl alcohol

10. Drum padding powder

11. Conductive grease

12. Dedicated magnetic roller cleaner

1. Phillips head screwdriver

2. Small common screwdriver

3. Needle nose pliers

4. Spring hook

5. Vacuum approved for toner

1. Turn the cartridge so that the handle is towards you (spring on the right). On either side of the cartridge is a white plastic pin

with one way screw heads. These pins are what hold and lock both halves together. Specialty drivers to remove them are not

available (at the time of this writing) so the only way to remove them (at the time of this writing), is to insert a 1" long or

#8 woodscrew into the center of the pin. Pull/pry out to remove. Leave the screws in so they can easily be installed.

www.uninetimaging.com

UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]