Xerox Adaptive CMYK+ Kit 참조 매뉴얼 - 페이지 25

{카테고리_이름} Xerox Adaptive CMYK+ Kit에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Adaptive CMYK+ Kit 48 페이지. For the xerox versant 180 press

Powering Off the Press

Note:

Before powering off the press, ensure that there are no active jobs.

1. Before powering off the press, wait approximately 60 seconds to exit the power saver mode.

2. To power off the press, press the Power On/Off button on the right side of the top front panel.

3. Before proceeding to the next step, wait for the power saver indicator to stop blinking.

Note:

To power off the press, do not use the main power switch.

Caution:

Unplugging the power cord with the main power on can damage the press

internal hard drive or cause a press malfunction.

Caution:

Powering off the main power immediately after powering on the main power can

damage the press internal hard drive or cause a press malfunction.

Caution:

Powering off the main power immediately after pressing the Power On/Off button

can damage the press internal hard drive or cause a press malfunction.

Caution:

Powering off the main power while a job is processing or while the Energy Saver

indicator is blinking can damage the press internal hard drive or cause a press malfunction.

4. To power off the main switch, open the front door, then press the main power switch to the Off

position.

5. Close the front door.

6. Disconnect the power cable from the electrical outlet to the press.

Xerox

Adaptive CMYK+ Kit for the Xerox

Replacing a Toner Kit

Versant

180 Press

Accessory Reference Guide