Xerox Adaptive CMYK+ Kit 참조 매뉴얼 - 페이지 28

{카테고리_이름} Xerox Adaptive CMYK+ Kit에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Adaptive CMYK+ Kit 48 페이지. For the xerox versant 180 press

Replacing a Toner Kit

Important:

drum protection box within 30 seconds.

5. To remove each drum cartridge, use the finger rings provided at both ends of the drum cartridge.

6. Carefully, lift each cartridge straight up and out of the press.

7. After you remove each drum cartridge, perform the following actions:

a. Rotate the drum cartridge so that the drum surface is facing up, then place the drum

cartridge onto the drum protection box.

b. Cover all removed drum cartridges with the other half of the drum protection box.

8. Fasten the tabs of the box immediately so that the drum cartridges are covered by the drum

protection box.

Note:

For extra protection, you can cover the ends of the drum protection box with paper,

black sheets, or other lightweight materials.

Xerox

Adaptive CMYK+ Kit for the Xerox

Accessory Reference Guide

To protect the photoreceptor from light, cover the drum cartridge with the

Versant

180 Press