Xerox DocuPrint N24 기술 지침 - 페이지 5

{카테고리_이름} Xerox DocuPrint N24에 대한 기술 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuPrint N24 10 페이지. Xerox docuprint n24: supplementary guide
Xerox DocuPrint N24에 대해서도 마찬가지입니다: 빠른 설치 (10 페이지), 기능 설명서 (15 페이지), 소모품 매뉴얼 (2 페이지)

페이지 인쇄

Xerox N24/32/40 Technical Instructions

Photo 29

Photo 30

Photo 31

Photo 32

Photo 33

Step 25

Remove the four screws found along the

top of the toner hopper. (See Photo 29)

Step 26

Using a small flat blade screwdriver

release the long clip the locks the toner

hopper cover to the hopper on the gears

side of the hopper. (See Photo 30)

Step 27

To release the three chips located along

the back of the toner hopper, press

down on the toner hopper cover just

above the clip. While applying pressure

to the cover, use a small flat blade

screwdriver to pry the clip that locks

the cover in place away from the

hopper. (See Photo 31)

Step 28

Release the clip located next to the fill

plug in the same way. (See Photo 32)

Step 29

With all the clips released, lift the cover

off the hopper. (See Photo 33)

Step 30

Using dry compressed air or

a vacuum clean out the toner

hopper and the toner hopper

cover.

Step 31

Using a Philips screwdriver

remove the screw that holds

the contact end cap to the

hopper. (See Photo 34)

Photo 34

Need help with a particular remanu-

facturing problem?

Call the Technical Resource Center from

8am - 5pm PST: 800 394.9900