Xerox Phaser 8200 네트워킹 설정 매뉴얼 - 페이지 37

{카테고리_이름} Xerox Phaser 8200에 대한 네트워킹 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 8200 47 페이지. Phaser color printer
Xerox Phaser 8200에 대해서도 마찬가지입니다: 트레이 모듈 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (2 페이지), 설치 매뉴얼 (1 페이지), 신속한 릴리스 매뉴얼 (1 페이지), 설치 (1 페이지), 매뉴얼 (2 페이지), 사양 (4 페이지), 서비스 매뉴얼 (11 페이지)

Novell NetWare 3.x/4.x/5.x Network

This section provides installation and troubleshooting steps for Novell NetWare (3.x/4.x/5.x):

Quick setup — see page 32.

Advanced setup — see page 33.

NetWare 3.x/4.x/5.x print server setup — see page 33.

Setup with CentreWare DP — see page 33.

Novell NetWare troubleshooting — see page 34.

For Windows environments, the following software is available:

CentreWare DP - Use this application to configure the printer and the network when using

NetWare 3.x, 4.x and 5.x. See the Advanced Network Management Tools CD-ROM for the

CentreWare DP software and documentation.

Novell NWAdmin - Use this utility to manage existing queues on networks running NetWare 4.x

or 5.x in NDS or NDPS/NEPS mode.

The Configuration Pages report information that you need for NetWare configuration. On the

Configuration Pages, all zeros in the IPX Networks fields indicates that the printer does not recognize

the network connection; this probably indicates a faulty cable connection, an incorrect frame type, or

Reply to Get Nearest Server has not been set to On. It must be set to On for at least one file server or

router on the same segment as the printer.

Note

For more information about the Xerox NDPS/NEPS solution, see the CentreWare for NDPS

User Guide on the Advanced Network Management Tools CD-ROM or see the Xerox

web site at www.xerox.com/officeprinting/support.

Print the Configuration Pages and retain them for reference. For information on printing

Configuration Pages, refer to the Front Panel section of the Features Guide on your printer's CD-

ROM.

Check the Configuration Pages and verify that Novell enable=On and correct Frame Type is set.

Install CentreWare DP from the Advanced Network Management Tools CD-ROM on a

Windows-based workstation.

Run the CentreWare DP application and choose Setup Wizard from the Printer menu. NetWare

3.x users should select the bindery server install and follow the Setup Wizard steps. NetWare 4.x

and 5.x users should select the NDS install and follow the Setup Wizard steps.

Install print drivers from your printer's Software and Documentation CD-ROM.

Send a print job to the printer.

Phaser® 8200 Color Printer