Xerox Phaser 3100MFP/S 사용 설명서 - 페이지 8

{카테고리_이름} Xerox Phaser 3100MFP/S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 3100MFP/S 36 페이지. Dect phone installation instructions
Xerox Phaser 3100MFP/S에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 평가자 매뉴얼 (12 페이지), 설치 지침 (2 페이지)

페이지 인쇄

OUR TELEPHONE

Handset set-up

Insert the batteries, one by one, making sure

they are the right way round, as indicated on

the

label

inside

compartment. Place the cover back on the

handset by pushing upwards until it is

completely closed.

Remove the protective film on the screen,

place the handset on the base to fully charge

the batteries.

The charging icon appears on the screen, it

indicates the charging status. Once the icon

is full, your batteries are charged.

Only use certified rechargeable batteries. For optimal battery charge, leave the

handset on the base for at least 12 hours during initial use. During charging, the

batteries may heat up, this is quite normal and without risk.

When the battery charge icon is at minimum, your screen will not be lit and the volume

level of the hands-free function will be decreased until the battery is recharged.

Handset turning on and off

To turn off the handset, hold down the red key

on the screen. Your handset is now switched off.

To turn on your handset, hold down the green key

Information is displayed on the screen, including the battery charging indicator icon, the

handset number (for example 1), the date, the time and the function keys.

the

handset

battery

. The "POWER OFF" message is displayed