Xerox PHASER 5400 빠른 설치 매뉴얼 - 페이지 23

{카테고리_이름} Xerox PHASER 5400에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox PHASER 5400 40 페이지. 1000-sheet stacker
Xerox PHASER 5400에 대해서도 마찬가지입니다: 기술 지침 (5 페이지), 매뉴얼 (11 페이지), 설치 지침 (2 페이지), 종이 매뉴얼 (2 페이지)

Xerox PHASER 5400 빠른 설치 매뉴얼
4.
At this point, you enter the Xerox TCP/IP Printer Port Wizard.
The wizard guides you step-by-step through the process of:
a.
Choosing a name for the new port.
b.
Identifying a printer by its DNS Name or IP Address.
c.
(Alternatively) Identifying a printer using the automatic
Printer Discovery feature.
5.
The wizard verifies the port name and printer address, and
automatically configures the remaining port settings for you. Any
errors detected in printer identification displays a dialog box
requesting Additional Information.
In the Add Xerox TCP/IP Port window:
a.
Under Enter a Port Name, enter a unique name for the port
being added.
b.
Under Enter a printer name or IP address, enter the printer's
host name or IP Address.
Click Next.
c.
Note
To locate Xerox printers on your local area network, select
Auto Printer Discovery, and then click Refresh. The Xerox
TCP/IP Port Monitor searches the network for Xerox printers
and displays them in a list. Select your desired printer from
the list and click OK.
6.
After all the port settings have been configured and verified, a
Completing dialog box appears summarizing all of the settings.
You have the opportunity to change any of the settings by clicking
the Back key. Otherwise, click the Finish key to complete the port
setup.
7.
Click OK to exit Printer Properties. This completes the
installation of the Xerox TCP/IP Port.
Quick Network Install Guide
17