Xerox Phaser 750DP 서비스 매뉴얼 - 페이지 28
{카테고리_이름} Xerox Phaser 750DP에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 750DP 40 페이지. Digital color printer / copier
Xerox Phaser 750DP에 대해서도 마찬가지입니다: 사양 (2 페이지), 브로셔 및 사양 (4 페이지), 참조 매뉴얼 (8 페이지), 매뉴얼 (9 페이지)
Status
Code
09-365,
The control logic sensed a failure of one of the toner dispensing systems. Yellow (09-365), Magenta (09-366), Cyan
366, 367,
(09-367), or Black (09-368).
368
Initial action:
Remove the corresponding toner cartridge and check for caking of the toner or blockage of the opening.
Verify that there is adequate toner in the cartridge.
If the problem still exists:
Place a service call.
09-376
The control logic sensed that the Waste Toner Sump is full.
Initial action:
Refer to proceedure (REP 5.5) to clean the waste toner sump.
Reset NVM6060 to 0.
If the problem still exists:
Place a service call.
09-620
The control logic sensed a failure of the ADC sensor setup.
Initial action:
Check the drum surface for damage or deformities (REP 5.4).
If the problem still exists:
Place a service call.
Fault Code Procedures
Description/Direction
5/98
2-28
5750 DocuCare Service Manual