Xerox Phaser 7750 소유자 매뉴얼

{카테고리_이름} Xerox Phaser 7750에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Phaser 7750 3 페이지. Color laser printer
Xerox Phaser 7750에 대해서도 마찬가지입니다: 사양 (4 페이지), 사용자 설명서 (35 페이지), 브로셔 (8 페이지), 소유자 매뉴얼 (4 페이지), 사양 (2 페이지), 네트워크 매뉴얼 (8 페이지), 빠른 설정 (5 페이지), 보충 설명서 (5 페이지), 매뉴얼 (5 페이지), 보충 설명서 (2 페이지), 보충 설명서 (16 페이지), 설치 매뉴얼 (6 페이지), 소유자 매뉴얼 (19 페이지), 유지 관리 매뉴얼 (1 페이지), 컬러 매뉴얼 (4 페이지), 설치 매뉴얼 (33 페이지), 빠른 참조 매뉴얼 (8 페이지), 서비스 매뉴얼 (14 페이지), 빠른 참조 매뉴얼 (8 페이지), 빠른 참조 매뉴얼 (8 페이지), 설정 매뉴얼 (2 페이지), 사용자 문서 (17 페이지), 설정 매뉴얼 (2 페이지), 메모리 추가 매뉴얼 (2 페이지)

Changing Paper

The paper trays adjust to accommodate most sizes and types of paper, transparencies, or other

specialty media. For best results, use only Xerox Phaser Color Printing Media specified for

this printer. They are guaranteed to produce excellent results on your Phaser 7750 Printer – the

Phaser 7750 and Phaser media are Made for Each Other. See "Basic Printing" later in this

section for instructions on how to load paper in the trays.

Caution

If you change the type or size of paper in a tray, you must change the paper type and size

on the front panel to match the paper that you loaded. If you fail to do this, print-quality

problems or jams can occur, and the fuser can be damaged.

Guidelines

After loading a tray and adjusting the paper guides, set the correct paper type and size at the

printer's front panel.

■

Do not overload the paper tray. See the tray label for the fill line.

■

Fan paper, transparencies, or other specialty media before loading in the paper tray.

■

If excessive jams occur, use fresh paper, transparencies, or other specialty media from a

new package.

Caution

Damage caused by using unsupported paper, transparencies, and other specialty media is

not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee.

The Total Satisfaction Guarantee is available in the United States and Canada. Coverage

may vary outside these areas; please contact your local representative for details.

Note

For optimal print quality and performance, set the correct paper type at the printer's front

panel after loading paper in any tray. When loading paper in Tray 1 (MPT) or Tray 2, also

set the correct paper size.

Load paper in the trays either long-edge feed or short-edge feed. See the Supported Papers,

Transparencies, and Other Specialty Media tables on the following pages to identify paper

feed directions for each paper size and paper tray.

Phaser® 7750 Color Laser Printer

2-2