Xerox PHASER 8560MFP 문서 부서 - 페이지 5

{카테고리_이름} Xerox PHASER 8560MFP에 대한 문서 부서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox PHASER 8560MFP 7 페이지. Letter-size color multifunction printer
Xerox PHASER 8560MFP에 대해서도 마찬가지입니다: 평가자 매뉴얼 (20 페이지), 보충 설명서 (26 페이지), 빠른 사용 설명서 (16 페이지), 보충 설명서 (7 페이지), 보충 설명서 (10 페이지), 지침서 (2 페이지), 사용자 설명서 (2 페이지), 변동성의 편지 (1 페이지), 평가자 매뉴얼 (20 페이지), 경쟁사 비교 (3 페이지), 빠른 사용 설명서 (17 페이지), 빠른 사용 설명서 (17 페이지), 빠른 사용 설명서 (18 페이지)

페이지 인쇄

Reco

Table 1 list s basic , recom mended, and opt ional t ools used to ser vice t his and ot her similar

products.

Table 1 Recommended Service Tools

Description

Detail

Torx Drivers Bits

T5, T8, T10, T15, T20

Phillips Drivers

Phillips # 2 and # 1 5.0 x 75 mm, 3.0 x 75 mm, 6.0 x 100 mm

Flathead Drivers

5.0 x 75 mm, 3.0 x 75 mm

Torque Screw Driver

Required for this system P/N 003082700

Hex Bit

2.5mm Hex Bit, T-20 P/N 003086600

Driver Extension

Small Channel lock Pliers

Needle Nose Pliers

Wire Cutters

Flashlight

Assorted Nut Drivers

Lint-Free Cloths

Cleaners

Multipurpose surface cleaner and Alcohol

ESD Strap

Nut Driver

5.5mm (magnetic) P/N 600T2123

Network Cross-over cable

Tech

Scanner Cali b ration page

P/N 109K01910

Toner Vac

Toner and general cleaning

Multimeter

Volts, Ohms, Current

Lubricant/Grease

Reolube P/N 006799700

Repairs and Adjustments

Disassembly Overview, REP 1.0.1

REP 1.0.1 Front Door / Tray 1 Assembly

Parts List on PL 1.0

Removal

Open the Front Door and release the 2 Stopper Straps.

Figure 1 Releasing the Front Door Stopper Straps

Open the plug cover and disconnect P/J650 from the right side of the Front Door (Tray1/

MPT).

Free the plug wiring from cable retainers.

Carefully remo ve t he Front Door (Tray 1/ MPT) assem bly by releasing t he lef t hinge pin

from the frame and sliding the door to the right to remove it.

10/2006

4-4

Initial Issue

Phaser 8510/8560MFP Multifunction Product