Xerox VersaLink B7030 보안 기능 추가 설명서 - 페이지 38
{카테고리_이름} Xerox VersaLink B7030에 대한 보안 기능 추가 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox VersaLink B7030 50 페이지. Drum cartridge
Xerox VersaLink B7030에 대해서도 마찬가지입니다: 빠른 사용 설명서 (20 페이지), 매뉴얼 (6 페이지), 유지 관리 (5 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 사용 설명서 (20 페이지), 빠른 사용 설명서 (20 페이지)
페이지 인쇄
Problem Solving
This section describes solutions to problems that you may come across while using the machine
and Embedded Web Server . The machine has certain built-in diagnostic capabilities to help you
identify problems and faults, and displays error messages on the control panel and web browser,
whenever problems or conflicts occur.
Fault Clearance Procedure
If a fault or a problem occurs, there are several ways in which you can identify the type of the fault.
Once a fault or a problem is identified, specify the probable cause, and then apply the appropriate
solution.
If a fault occurs, first refer to the screen messages to clear the fault according to the specified order.
Also refer to the fault codes displayed on the touch screen in the Machine Status mode.
Refer to the Fault Codes table below for an explanation of some fault codes and corresponding corrective actions.
When you have problems in fixing the fault, contact a System Administrator for assistance.
In some cases, the machine may need to be turned off and then on.
NOTE :
You should call for service representative if the problem persists or a message indicates so.
Even when the power of the machine fails, all the queued jobs will be saved because the machine is equipped
with the storage device. The machine will resume processing the queued jobs when the power of the
machine is turned back on.
Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
Security Function Supplementary Guide
38