Xerox Versant 280 Press 매뉴얼 - 페이지 19

{카테고리_이름} Xerox Versant 280 Press에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Versant 280 Press 44 페이지. Customized envelope feeder
Xerox Versant 280 Press에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (44 페이지)

페이지 인쇄
Xerox Versant 280 Press 매뉴얼

Section 4 Repairs and Adjustments

REP 4.1 Cleaning Feed Belts, Discharge Belts and O-Rings

1.
Turn the power switch to O (off) and remove the power cord from the power source.
2.
Apply a small amount of isopropyl alcohol to a soft cloth.
3.
For belts, use moderate pressure to wipe across one belt at a time while manually rotating
it. Repeat for several rotations of each belt.
4.
For O-rings, remove the gate assembly from the gate plate first and then wipe in each direction.

REP 4.2 Cleaning Sensor Lenses

1.
Turn the power knob to O (off) and remove the power cord from the power source.
2.
Use a soft, dry cloth to wipe gently across the face of each lens.

REP 4.3 Checking for Separator Assembly Wear

1.
Check for visual signs of wear:
2.
Flat areas along the O-rings.
Xerox Customized Envelope Feeder – Problem Solving Guide
4-1