Xerox Versant 4100 Press 매뉴얼 - 페이지 12

{카테고리_이름} Xerox Versant 4100 Press에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Versant 4100 Press 44 페이지. Customized envelope feeder

Insert the Feed Ramps into the tray to eliminate jamming.
Are the envelope jams occurring at the Separator?
N
Y
Set the wedge position to match the media size. Also make sure the Separator setting is
optimized for the media being fed.
Are envelopes jamming at the Separator
Gate, before reaching the Discharge?
N
Y
Confirm the O-Ring Separator is located in between the belts - not over the belts.
Clear any jams and press the Jog button in short increments to confirm the envelopes are not getting
caught on the guides at the top of the discharge.
Are envelopes being fed out of the Hopper?
Y
N
Increase the pressure on the Separator.
NOTE: If A2 envelopes are not reaching the feed head on the Versant, perform the following steps:
Be sure the side guides are not too tight and are "choking" the envelopes, preventing them
from reaching the Versant feed head.
Lower the height of the feeder discharge by turning the knob with the orange sticker on it at
the back (inboard) side of the feeder one half of a turn COUNTERCLOCKWISE, as noted
in the Adjustment procedure.
2-6
Xerox Customized Envelope Feeder – Problem Solving Guide